Notice for undertray 2 lights (indicators & stop lights authorized)

600-750-1000 GSXR(new models)

  1. Disassemble the back shell

  2. Cut the bib

  3. Cut the bars as on picture 2

  4. For GSXR1000 only: cut the bottom of the injection box  as showed . Screw the under tray to the frame (3 holes).

  5. Choice for connection:

Connect the  STOP  wire to the  21w light  and connect the night wire to 5W light

or  use the  specific connection  for
 2 simultaneous lights ( note: regulation needs a single filament bulb in a small  diameter light)

  Or LED lights : LED connection

  1. Cut the wires of the original indicators  and solde to the new indicators

  2. Fixe the license plate  and the  two lights with  included rivets:  special drilled plates 

 

 

 

    REMARQUE:

For LED lights

The small resistance is included with the wires :

 red wire=+stop

small black wire =+light

big black wire= -ground